Jet - 16" Swing, 60" Between Centers, 230 Volt, Triple Phase Engine Lathe - 4MT Taper, 7-1/2 hp, 40 to 1,800 RPM, 1-1/2" Bore Diam
Item #: 78614260
Brand: Jet
Model #: 321383
Exact Tooling IR#: 04
Features and Benefits
Engine lathes are used for heavy-duty work and offer heavy casted machine bases with built-in coolant systems and foot brakes. The Swing range on these lathes is from 13" and larger.
Geared head lathes generally feature drive belt(s) from the motor to the headstock. Speed changes are made by shifting gear lever combinations in the headstock.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Machine Type | Engine Lathe |
| Spindle Speed Control | Geared Head |
| Phase | 3 |
| Voltage | 230 |
| Horsepower (HP) | 7-1/2 |
| Swing (Inch) | 16 |
| Distance Between Centers (Inch) | 60 |
| Spindle Bore Diameter (mm) | 38.00 |
| Spindle Bore Diameter (Inch) | 1-1/2 |
| Spindle Taper Size | 4MT |
| Swing Over Gap (Inch) | 19 |
| Swing Over Gap (Decimal Inch) | 19.0000 |
| Swing Over Cross Slide (Decimal Inch) | 7.5000 |
| Gap Length (Decimal Inch) | 12.2500 |
| Bed Width (Decimal Inch) | 10.5000 |
| Spindle Nose Designation | D1-4 |
| Number of Spindle Speeds | 12 |
| Minimum Spindle Speed (RPM) | 40.00 |
| Maximum Spindle Speed (RPM) | 1800.00 |
| Number of Inch Threads | 40 |
| Maximum Threads Per Inch | 112 |
| Min. Longitudinal Feed Per Rev. (Decimal Inch) | 0.0012 |
| Max. Longitudinal Feed Per Rev. (Decimal Inch) | 0.0294 |
| Min. Cross Feed Rate Per Revolution (Decimal Inch) | 0.000300 |
| Max. Cross Feed Rate Per Revolution (Decimal Inch) | 0.0103 |
| Minimum Threads Per Inch | 4 |
| Tailstock Travel (Decimal Inch) | 4.7500 |
| Tailstock Taper Size | 3MT |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It