![Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Exact Industrial Supply](http://exactindustrialsupply.com/cdn/shop/products/comingsoon_6fb45cf1-3df7-483c-80cc-4cf5821502ea_1024x1024.png?v=1585920579)
Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts
Item #: 42507871
Brand: Rong Fu
Model #: 0954291/4244015
Exact Tooling IR#: 04
Features and Benefits
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications | |
---|---|
Spindle Speed Control | Geared Head |
Swing Distance (Inch) | 20 |
Phase | 1 |
Table Length (Inch) | 28-3/4 |
Table Width (Inch) | 8-1/4 |
Longitudinal Travel (Inch) | 18-1/8 |
Cross Travel (Inch) | 9 |
Number of Spindle Speeds | 6 |
Minimum Spindle Speed (RPM) | 50.00 |
Maximum Spindle Speed (RPM) | 1550.00 |
Spindle Travel Length (Decimal Inch) | 5.1180 |
Spindle Taper Size | 3MT/R8 |
Drilling Capacity in Steel (Inch) | 38.1000 |
Drilling Capacity in Steel (Decimal Inch) | 1.5000 |
Drilling Capacity in Cast Iron (mm) | 38.10 |
Drilling Capacity in Cast Iron (Inch) | 1-1/2 |
Tapping Capacity in Steel (mm) | 19.05 |
Tapping Capacity in Steel (Inch) | 3/4 |
Quill Diameter (Decimal Inch) | 4.5270 |
Spindle Power Feed Rate Per Minute (mm/rev) | 0.12; 0.18; 0.25 |
Maximum Spindle To Column Distance (Inch) | 10.2360 |
Number of T-Slots | 4 |
T-Slot Size (mm) | 16 x 26 |
Left-Hand Head Tilt (Degrees) | 90.00 |
Right-Hand Head Tilt (Degrees) | 90.00 |
Horsepower (HP) | 1.00 |
Voltage | 220 |
Includes | AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440156); Stand (MSC 09519919) |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It