Horizontal/Vertical 5C Indexing Fixture

Item #: JJ55004
Manufacturer: Quality Import
Mfg #:

Technical Specifications:
*Base: 4 x 8 Horiz; 4 x 6 Vert *Brand Name: Quality Import *Center Height: 4 *Collet Style: 5C *Overall Height: 7-3/4 Horiz; 8 Vert *Type: Horizontal/Vertical 5C Indexing Fixture *Weight: 30 lbs

Description:
*5C Collet Horizontal/Vertical Indexing Fixture *A rapid indexing fixture for use with both Collets (5C 1-1/8" capacity) and lathe chucks *The latter may be fitted to the 2-1/4-8 threaded spindle *Fixtures are designed to be mounted vertically or horizontally *Indexing is accomplished by releasing the spring loaded index pin lever *The spindle rotates freely until the next open space when the index pin engages again and locks the spindle *Possible divisions are: 2, 3, 4, 6, 8, 12 and 24

Shipping Info:
*Actual Weight - 30.6000 *Dimensions - Height: 9.70 Length: 11.5 Width: 9.90

$952.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5C Collet Chuck -- #1CC; 5C Collet Style

Item #: JM501CC
Manufacturer: Kalamazoo
Mfg #: 1CC

Technical Specifications:
*Brand Name: Kalamazoo *Collet Style: 5C *Diameter: 3 *Length: 4 *Type: 5C Collet Chuck *Weight: 6 lbs

Description:
*5C Collet Chuck *For short runs using a 5C Collet *Lock and release at the front *Heavy-duty *All steel " hardened and ground *Drilled and tapped holes at rear of collet chuck for mounting to a plate

Shipping Info:
*Actual Weight - 6.1500 *Dimensions - Height: 8.00 Length: 7.40 Width: 5.30

$535.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Collet Master -- #CM5C; 5C Collet Style

Item #: NJ50CM5C
Manufacturer: Suburban
Mfg #: CM5C

Technical Specifications:
*Base: 3-3/4 x 3-1/2 *Brand Name: Suburban *Capacity: 1-1/8 *Center Height: 3-5/8 *Collet Style: 5C *Overall Height: 5-1/2 *Spindle TIR: .0001 *Type: Collet Master *Weight: 9 lbs

Description:
*Collet Master *Uses all standard 5C Collets *48 position index plate provides a hard stop every 7-1/2° *Drawbar and fitted wooden case included *Two sealed, preloaded ball bearings in spindle *Hardened and ground base is held square and parallel to spindle. *1-1/8" Through hole *Optional face plate and V-block for eccentric forms available *Indexing accuracy ± 45 sec.

Shipping Info:
*Actual Weight - 13.3000 *Dimensions - Height: 10.7 Length: 10.6 Width: 10.4

$1,926.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

6 x 4-1/2" 5C Horizontal / Vertical Collet Fixture

Item #: JN6071103
Manufacturer: World Class Quality
Mfg #:

Technical Specifications:
*Brand Name: World Class Quality *Collet Style: 5C *Type: Horizontal/Vertical 5C Collet Fixture *Weight: 18 lbs

Description:
*Hardened and ground spindle *Two position heavy casting *Collets are held dead length *Quick-Acting lever type *Base Width: 4-1/2" *Base Length: 6" *Overall Height" 4"

Shipping Info:
*Actual Weight - 18.0000 *Dimensions - Height: 4.50 Length: 7.50 Width: 6.50

$298.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Holding Fixture -- #10C; 5C Collet Style

Item #: JM5010C
Manufacturer: Kalamazoo
Mfg #: 10C

Technical Specifications:
*Brand Name: Kalamazoo *Collet Style: 5C *Type: Holding Fixture *Weight: 18 lbs

Description:
*Collets held dead length *Hardened and ground spindle two position - heavy casting

Shipping Info:
*Actual Weight - 13.9500 *Dimensions - Height: 7.80 Length: 7.40 Width: 5.30

$402.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Horizontal/Vertial Angle Collet Fixture - 5C Collet Style

Item #: JN50MSR1
Manufacturer: Quality Import
Mfg #:

Technical Specifications:
*Brand Name: Quality Import *Collet Style: 5C *Overall Height: 3-3/4 *Type: Horizontal/Vertical Angle Collet Fixture

Description:
*Angle Collet Fixture *Uses Standard 5C Collets *All moving parts hardened, ground and honed *Collet does not move up or down *Retains positive relation to the base *Can be adjusted or changed without disturbing your set-up *For drilling, milling, grinding, tapping assembly, etc *A must for every machine shop *Height 3-3/4"

Shipping Info:
*Actual Weight - 10.4500 *Dimensions - Height: 4.40 Length: 7.30 Width: 4.50

$175.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1 Degree 5C Indexing Spin Jig -- #SJ5C; 5C Collet Style

Item #: MW50SJ5C
Manufacturer: World Class Quality
Mfg #:

Technical Specifications:
*Brand Name: World Class Quality *Capacity: 1-1/8 *Collet Style: 5C *Spindle TIR: .0005 *Type: 1 Degree 5C Indexing Spin Jig

Description:
*5C Indexing Spin Jig *A multi-purpose machine indexing fixture designed to extend work capabilities of surface grinders, drill presses and all types of milling machines *Plate is graduated by degrees to 360° *Vernier to 10 min. accuracy .0005 ground lapped; 2" travel for flute grinding *Standard 5C collets *Capacity 1-1/8" *Simple 1° indexing *Spindle lock *Hardened and ground spindle *Spindle lock hole for tightening collet *Index plate has 36 hole circle

Shipping Info:
*Actual Weight - 12.4000 *Dimensions - Height: 6.80 Length: 11.3 Width: 7.40

$115.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

End Mill Grinding Fixture - 5C Collet Style

Item #: HN50RGF
Manufacturer: Quality Import
Mfg #:

Technical Specifications:
*Base: 2-1/2 x 4-1/2 *Brand Name: Quality Import *Capacity: 1/8 *Collet Style: 5C *Type: End Mill Grinding Fixture

Description:
*End Mill Grinding Fixture *Uses 5C Collets (no more bushings to lose) which means any shank size end mill from 1/16" to 1-1/8" can be ground *Shell mills can be easily held with straight shank arbors *The use of 5C Collets assures concentricity *Solid positive ball stops with 15° spacing fast and easy set ups *Grinds 2-3-4-6-8 and 12-fluted end mills and shellmills. Faces only! *Clearance and relief angles are built into base *Solid 2-1/2"x 4-1/2". Base ground on bottom for sure contact with magnet *Black oxide finish

Shipping Info:
*Actual Weight - 3.0500 *Dimensions - Height: 2.90 Length: 4.70 Width: 4.10

$91.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It