CT50-SLK12-75

Item #: TP349910004
Manufacturer: OSG USA, Inc.
Mfg #: 9910004

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - 7.9500 *Dimensions - Height: 5.15 Length: 9.40 Width: 5.45

$560.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8-1/8X6.30"GL SHRINK EXTENSION

Item #: HA717758Z018Z
Manufacturer: Haimer USA LLC
Mfg #: 77.5/8Z0.1

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$261.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 1/2 x 3.54 - Shrink Fit Tool Holder

Item #: GM94H63503549
Manufacturer: Parlec
Mfg #: H63A-50SF3

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Parlec *Gage Length: 3.540 *Model Number: H63A-50SF354-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$294.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 32mm x 100mm Shrink Fit Chuck

Item #: HA7140840324
Manufacturer: Haimer USA LLC
Mfg #: 40.840.32.

Technical Specifications:
*Bore Diameter: 32mm *Brand Name: Haimer USA LLC *Gage Length: 100mm *Model Number: 40.840.32.4 *Outside Diameter: 53mm *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 4.0000

$366.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CS12-1/8-80

Item #: TP349910076
Manufacturer: OSG USA, Inc.
Mfg #: 9910076

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .4550 *Dimensions - Height: 1.20 Length: 5.05 Width: 1.30

$465.10

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT30 3/8X2.36"GL SHRINK FIT CHUCK

Item #: HA713064538Z
Manufacturer: Haimer USA LLC
Mfg #: 30.645.3/8

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 1.2100

$327.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

20MM-6MMX SHRINK EXTENSION

Item #: HA717820006
Manufacturer: Haimer USA LLC
Mfg #: 78.200.06

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .7700

$261.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CF12-12-55

Item #: TP348910066
Manufacturer: OSG USA, Inc.
Mfg #: 8910066

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .5600 *Dimensions - Height: 1.20 Length: 4.05 Width: 1.30

$370.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 -3/8 X6.30"GL SHRINK EXTENSION

Item #: HA717834Z038Z1
Manufacturer: Haimer USA LLC
Mfg #: 78.3/4Z0.3

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$261.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4" CAT 40 Shrink Fit Toolholder - 3.15" Gauge Length

Item #: GM30025315D
Manufacturer: Briney
Mfg #: V40SF-025-

Technical Specifications:
*Bearing Surface: 1.042 *Bore Diameter: 1/4 *Brand Name: Briney *Gage Length: 3.150 *Outside Diameter: .984 *Shank: CAT40 *Standard: DIN *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 3.0000

$276.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4" CAT 50 Shrink Fit Toolholder - 3.0" Gauge Length

Item #: GM3025300
Manufacturer: Briney
Mfg #: V50SF-025-

Technical Specifications:
*Bearing Surface: .750 *Bore Diameter: 1/4 *Brand Name: Briney *Gage Length: 3.000 *Outside Diameter: 1.000 *Shank: CAT50 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 7.5000

$393.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 STRT SHK 3/8 SHRINK FIT EXT

Item #: GM76502140
Manufacturer: Lyndex
Mfg #: ST75-SF037

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$192.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ER32 SRK 1/4X1.500 SHRINK FIT HLDR

Item #: EH4500562
Manufacturer: Iscar
Mfg #: 4500562

Technical Specifications:
*Brand Name: Iscar

Description:

Shipping Info:
*Actual Weight - .4010

$128.70

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

16MM-10MMX160MM SHRINK EXTENSION

Item #: HA717716210
Manufacturer: Haimer USA LLC
Mfg #: 77.162.10

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$261.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

20mm CAT 40 Shrink Fit Toolholder - 100mm Gauge Length

Item #: GM3020M100
Manufacturer: Briney
Mfg #: V40SF-20M-

Technical Specifications:
*Bearing Surface: 31.75mm *Bore Diameter: 20mm *Brand Name: Briney *Gage Length: 3.937 *Outside Diameter: 38.10mm *Shank: CAT40 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 3.5000

$342.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm-150mm - Shrink Fit Holder

Item #: TE1229266
Manufacturer: Techniks
Mfg #: 29266

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Techniks *European-DIN Tool Shank Range: 12mm *Gage Length: 150mm *Outside Diameter: 3.88 *Shank: 12mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.47

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4550

$415.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 5/8 x 3.15 Shrink Fit Chuck

Item #: HA714084058Z4
Manufacturer: Haimer USA LLC
Mfg #: 40.840.5/8

Technical Specifications:
*Bore Diameter: 5/8 *Brand Name: Haimer USA LLC *Gage Length: 3.15 *Model Number: 40.840.5/8Z.4 *Outside Diameter: 1.34 *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 3.2500

$353.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 3/16" x 90mm - Shrink Fit Holder

Item #: TE1239110
Manufacturer: Techniks
Mfg #: 39110

Technical Specifications:
*Bore Diameter: 3/16 *Brand Name: Techniks *European-DIN Tool Shank Range: 4.8mm *Gage Length: 3.54 *Outside Diameter: 2.48 *Shank: 3/16 *Standard: ISO 1940 *Type: Shrink Fit BT Holder *USA-ANSI Tool Shank Range: 3/16

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .0893

$263.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 3/8 x 3.15 Shrink Fit Chuck

Item #: HA715084038Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.840.3/8

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Haimer USA LLC *Gage Length: 3.15 *Model Number: 50.840.3/8Z.4 *Outside Diameter: 1.26 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 8.0000

$536.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/4"-5" - Shrink Fit Holder

Item #: TE1229013
Manufacturer: Techniks
Mfg #: 29013

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 5 *Outside Diameter: 2.5 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1931

$273.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It