8" OAL, Steel, Black Finish

Item #: 62877634
Brand: Proto
Model #: J2636PW
Exact Tooling IR#: 04

Features and Benefits

Pull wrenches, also known as tube wrenches, non-striking wrenches or leverage wrenches, are designed with a long tube that is added to the end for increasing leverage in the setting of large fasteners.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Single end wrenches are designed with one working end.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Pull Wrench
Style	Nonratcheting
Size (Inch)	2-1/4
Number of Points	12
Head Type	Single End
Finish/Coating	Black
Additional Information	Offset
Overall Length (Inch)	13-5/8
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Pull Wrench

Style Nonratcheting

Size (Inch) 2-1/4

Number of Points 12

Head Type Single End

Finish/Coating Black

Additional Information Offset

Overall Length (Inch) 13-5/8

Material Steel

PSC Code 5120

$151.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 2-3/8" 6 Point Striking Box Wrench - Single End, 3-13/32" Head Diam, 12-3/8" OAL, Steel, Black Finish

Item #: 85246528
Brand: Proto
Model #: J2738SW
Exact Tooling IR#: 04

Features and Benefits

Striking box wrenches are short, thick and designed to loosen or tighten large fasteners by the striking of a hammer. The hammer hits the wrench on the flat or anvil area for this operation.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Single end wrenches are designed with one working end.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Striking
Style	Nonratcheting
Size (Inch)	2-3/8
Number of Points	6
Head Type	Single End
Finish/Coating	Black
Overall Length (Inch)	12-3/8
Material	Steel
Head Diameter (Inch)	3-13/32
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Nonratcheting

Size (Inch) 2-3/8

Number of Points 6

Head Type Single End

Finish/Coating Black

Overall Length (Inch) 12-3/8

Material Steel

Head Diameter (Inch) 3-13/32

PSC Code 5120

$148.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 1-3/4" 12 Point Tethered Striking Box Wrench - Single End, 13-7/16" OAL, Steel, Black Finish

Item #: 61645495
Brand: Proto
Model #: J2628SW-TT
Exact Tooling IR#: 04

Features and Benefits

Striking box wrenches are short, thick and designed to loosen or tighten large fasteners by the striking of a hammer. The hammer hits the wrench on the flat or anvil area for this operation.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Tethered wrenches are designed with a tethering system to prevent the user from dropping the wrench when using them at height.

Single end wrenches are designed with one working end.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Striking
Style	Nonratcheting
Style	Tethered
Size (Inch)	1-3/4
Number of Points	12
Head Type	Single End
Finish/Coating	Black
Overall Length (Inch)	13-7/16
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Nonratcheting

Style Tethered

Size (Inch) 1-3/4

Number of Points 12

Head Type Single End

Finish/Coating Black

Overall Length (Inch) 13-7/16

Material Steel

PSC Code 5120

$135.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Blackhawk by Proto - Wrench Sets Tool Type: Combination Wrench System of Measurement: Metric

Item #: 11371788
Brand: Blackhawk by Proto
Model #: BL-014M
Exact Tooling IR#: 04

Product Specifications

Wrench Sets; Tool Type: Combination Wrench ; System of Measurement: Metric ; Size Range (mm): 7.0 - 20.0 ; Number of Pieces: 14 ; Finish/Coating: Black ; Metric Size: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20

Tool Type Combination Wrench

System of Measurement Metric

Size Range (mm) 7.0 - 20.0

Number of Pieces 14

Finish/Coating Black

Metric Size 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20

Number of Points 12

ASME Spec ASME B107.100

Warranty Mfr's Limited Lifetime Warranty

Container Type Vinyl Roll

Head Angle 15

Metric Size 7, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19; 20

PSC Code 5120

$131.86

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 2-1/16" 12 Point Striking Box Wrench - Single End, 3" Head Diam x 1-5/16" Head Thickness, 10-3/4" OAL, Steel, Black Finish

Item #: 07119431
Brand: Proto
Model #: JUSN333
Exact Tooling IR#: 04

Features and Benefits

Striking box wrenches are short, thick and designed to loosen or tighten large fasteners by the striking of a hammer. The hammer hits the wrench on the flat or anvil area for this operation.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Single end wrenches are designed with one working end.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Striking
Style	Nonratcheting
Size (Inch)	2-1/16
Number of Points	12
Head Type	Single End
Finish/Coating	Black
Overall Length (Inch)	10-3/4
Material	Steel
Head Diameter (Inch)	3
Head Thickness (Inch)	1-5/16
Warranty	Mfr's Lifetime Warranty
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Nonratcheting

Size (Inch) 2-1/16

Number of Points 12

Head Type Single End

Finish/Coating Black

Overall Length (Inch) 10-3/4

Material Steel

Head Diameter (Inch) 3

Head Thickness (Inch) 1-5/16

Warranty Mfr's Lifetime Warranty

PSC Code 5120

$148.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 27mm x 32mm Nonsparking Standard Open End Wrench - Double End, Plain Finish

Item #: 92734011
Brand: Ampco
Model #: WO-27X32
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Aluminum bronze offers non-sparking, non-magnetic and corrosion-resistant properties and is ideal for use where flammable or combustible elements are present.

Product Specifications
Wrench Type	Open End Wrench
Style	Non-Sparking
Style	Standard
Size (mm)	27 x 32
Finish/Coating	Plain
Head Type	Double End
Warranty	Mfr's Limited Lifetime Warranty
Material	Aluminum Bronze
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Non-Sparking

Style Standard

Size (mm) 27 x 32

Finish/Coating Plain

Head Type Double End

Warranty Mfr's Limited Lifetime Warranty

Material Aluminum Bronze

PSC Code 5120

$144.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 5 Piece, 1/4 x 5/16 to 3/4 x 7/8", 6 & 12 Point, Ratcheting Box Wrench Set - Inch System of Measurement, Full Polish Finish, Comes in Nylon Roll

Item #: 84975614
Brand: Proto
Model #: J1180A
Exact Tooling IR#: 04

Product Specifications
Tool Type	Ratcheting Box Wrench
System of Measurement	Inch
Size Range (Inch)	1/4 x 5/16 - 3/4 x 7/8
Number of Pieces	5
Finish/Coating	Full Polish
Sizes Included	1/4x5/16, 3/8x7/16, 1/2x9/16, 5/8x11/16, 3/4x7/8
Number of Points	6, 12
Container Type	Nylon Roll
Additional Information	Ratcheting Box End
Offset Angle	25
PSC Code	5120

$131.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 36mm 12 Point Combination Wrench - 15° Head Angle, 19-5/16" OAL, Steel, Black Chrome Finish

Item #: 07119100
Brand: Proto
Model #: JSCVM36
Exact Tooling IR#: 04

Features and Benefits

Combination wrenches are designed with an open end and a closed (box) end. Combination wrenches are used in a variety of applications.

Spline wrenches turn multiple fastener types by engaging the flat sides versus the corner points.

Reverse ratcheting wrenches are designed so they can reverse the ratcheting direction. Some ratchets have a switch to reverse the direction.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Steel is a high tensile strength alloy.

Product Specifications
Type	Combination Wrench
Style	Spline
Style	Reversible Ratcheting
Size (mm)	36
Number of Points	12
Finish/Coating	Black Chrome
Material	Steel
Overall Length (Inch)	19-5/16
Warranty	Mfr's Lifetime Warranty
Head Thickness (Inch)	25/64
Head Angle	15
PSC Code	5120

Product Specifications

Type Combination Wrench

Style Spline

Style Reversible Ratcheting

Size (mm) 36

Number of Points 12

Finish/Coating Black Chrome

Material Steel

Overall Length (Inch) 19-5/16

Warranty Mfr's Lifetime Warranty

Head Thickness (Inch) 25/64

Head Angle 15

PSC Code 5120

$149.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 1-1/4" Open End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I

Item #: 73763088
Brand: CDI
Model #: TCQJO40A
Exact Tooling IR#: 04

Product Specifications
Head Type	Open End
Size (Inch)	1-1/4
Maximum Torque (Ft/Lb)	60
For Use With	CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I
PSC Code	5120

$156.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 4 Piece, 13/16" to 1", 12 Point Ratcheting Combination Wrench Set - Inch Measurement Standard, Chrome Finish, Comes in Plastic Rack

Item #: 61244653
Brand: GearWrench
Model #: 9545N
Exact Tooling IR#: 04

Product Specifications
Tool Type	Ratcheting Combination Wrench
System of Measurement	Inch
Size Range (Inch)	13/16 - 1
Number of Pieces	4
Finish/Coating	Chrome
Fractional Size	13/16, 7/8, 15/16, 1
Sizes Included	13/16, 7/8, 15/16, 1
Number of Points	12
Warranty	Mfr's Limited Lifetime Warranty
Container Type	Plastic Rack
PSC Code	5120

$143.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 18mm Nonsparking Standard Spud Handle Open End Wrench - Single End, Plain Finish

Item #: 92731124
Brand: Ampco
Model #: W-2218
Exact Tooling IR#: 04

Features and Benefits

Spud handles, also known as spud wrenches, contain the standard box end on one side and a long pointed pin on the opposite. The needle side is used for aligning bolt holes.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Single end wrenches are designed with one working end.

Product Specifications
Wrench Type	Spud Handle
Style	Non-Sparking
Style	Standard
Size (mm)	18
Finish/Coating	Plain
Head Type	Single End
PSC Code	5120

Product Specifications

Wrench Type Spud Handle

Style Non-Sparking

Style Standard

Size (mm) 18

Finish/Coating Plain

Head Type Single End

PSC Code 5120

$127.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ridgid - 24" Aluminum Straight Pipe Wrench - 3" Pipe Capacity

Item #: 74779828
Brand: Ridgid
Model #: 31105
Exact Tooling IR#: 04

Product Specifications
Type	Straight Pipe Wrench
Maximum Pipe Capacity (Inch)	3
Overall Length (Inch)	24
Material	Aluminum
PSC Code	5120

$143.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 2-3/16" 12 Point Combination Wrench - 15° Offset Angle, 27.795" OAL, Steel, Satin Finish

Item #: 31594237
Brand: GearWrench
Model #: 81826
Exact Tooling IR#: 04

Features and Benefits

Combination wrenches are designed with an open end and a closed (box) end. Combination wrenches are used in a variety of applications.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Satin finishes offer slip resistant grips and are corrosion-resistant.

Steel is a high tensile strength alloy.

Product Specifications
Type	Combination Wrench
Style	Nonratcheting
Size (Inch)	2-3/16
Number of Points	12
Finish/Coating	Satin
Material	Steel
Overall Length (Inch)	27.795
Warranty	Mfr's Limited Lifetime Warranty
Offset Angle	15
Head Thickness (Inch)	0.843
Head Diameter (Inch)	4.409
Head Angle	15
PSC Code	5120

Product Specifications

Type Combination Wrench

Style Nonratcheting

Size (Inch) 2-3/16

Number of Points 12

Finish/Coating Satin

Material Steel

Overall Length (Inch) 27.795

Warranty Mfr's Limited Lifetime Warranty

Offset Angle 15

Head Thickness (Inch) 0.843

Head Diameter (Inch) 4.409

Head Angle 15

PSC Code 5120

$143.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 1-11/16" 12 Point Tethered Striking Box Wrench - Single End, 13-7/16" OAL, Steel, Black Finish

Item #: 61645396
Brand: Proto
Model #: J2627SW-TT
Exact Tooling IR#: 04

Features and Benefits

Striking box wrenches are short, thick and designed to loosen or tighten large fasteners by the striking of a hammer. The hammer hits the wrench on the flat or anvil area for this operation.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Tethered wrenches are designed with a tethering system to prevent the user from dropping the wrench when using them at height.

Single end wrenches are designed with one working end.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Striking
Style	Nonratcheting
Style	Tethered
Size (Inch)	1-11/16
Size (mm)	43
Number of Points	12
Head Type	Single End
Finish/Coating	Black
Overall Length (Inch)	13-7/16
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Nonratcheting

Style Tethered

Size (Inch) 1-11/16

Size (mm) 43

Number of Points 12

Head Type Single End

Finish/Coating Black

Overall Length (Inch) 13-7/16

Material Steel

PSC Code 5120

$103.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 23mm 12 Point Combination Wrench - 12-13/16" OAL, Aluminum Bronze, Plain Finish

Item #: 01659903
Brand: Ampco
Model #: 1330
Exact Tooling IR#: 04

Features and Benefits

Combination wrenches are designed with an open end and a closed (box) end. Combination wrenches are used in a variety of applications.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Non-sparking wrenches are used in environments where flammable or combustible elements are present.

Plain, uncoated tools do not have a finish or coating.

Aluminum bronze offers non-sparking, non-magnetic and corrosion-resistant properties and is ideal for use where flammable or combustible elements are present.

Product Specifications
Type	Combination Wrench
Style	Nonratcheting
Style	Nonsparking
Size (mm)	23
Number of Points	12
Finish/Coating	Plain
Material	Aluminum Bronze
Overall Length (Inch)	12-13/16
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120

Product Specifications

Type Combination Wrench

Style Nonratcheting

Style Nonsparking

Size (mm) 23

Number of Points 12

Finish/Coating Plain

Material Aluminum Bronze

Overall Length (Inch) 12-13/16

Warranty Mfr's Limited Lifetime Warranty

PSC Code 5120

$147.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 26mm x 29mm Nonsparking Open End Wrench - 10-1/4" OAL, Double End, Plain Finish

Item #: 56324817
Brand: Ampco
Model #: WO-26X29
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Plain, uncoated tools do not have a finish or coating.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Aluminum bronze offers non-sparking, non-magnetic and corrosion-resistant properties and is ideal for use where flammable or combustible elements are present.

Product Specifications
Wrench Type	Open End Wrench
Style	Non-Sparking
Size (mm)	26 x 29
Finish/Coating	Plain
Head Type	Double End
Overall Length (Inch)	10-1/4
Head Thickness (Inch)	2-3/4
Warranty	Mfr's Limited Lifetime Warranty
Material	Aluminum Bronze
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Non-Sparking

Size (mm) 26 x 29

Finish/Coating Plain

Head Type Double End

Overall Length (Inch) 10-1/4

Head Thickness (Inch) 2-3/4

Warranty Mfr's Limited Lifetime Warranty

Material Aluminum Bronze

PSC Code 5120

$134.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Martin Tools - Open End Wrenches Wrench Type: Ignition Tool Type: Standard

Item #: 00400929
Brand: Martin Tools
Model #: BLK3732

Features and Benefits

Ignition wrenches are small wrenches used on engine parts and other automotive applications. They are designed with an angled head, allowing for access in tight areas.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Steel is a high tensile strength alloy.

Product Specifications

Open End Wrenches; Wrench Type: Ignition ; Tool Type: Standard ; Size (Inch): 2 ; Finish/Coating: Black ; Head Type: Double End ; Overall Length (Inch): 19-1/4

Wrench Type Ignition

Tool Type Standard

Size (Inch) 2

Finish/Coating Black

Head Type Double End

Overall Length (Inch) 19-1/4

Head Angle 15, 60

Head Thickness (Inch) 9/16

Warranty Mfr's Lifetime Warranty

Material Steel

Head Width (Inch) 3-15/16

PSC Code 5120

$143.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 1-3/8" Open End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 800NMIMH, 600T-I

Item #: 73760639
Brand: CDI
Model #: TCQZO44ADP
Exact Tooling IR#: 04

Product Specifications
Head Type	Open End
Size (Inch)	1-3/8
For Use With	CDI Torque Wrenches 800NMIMH, 600T-I
PSC Code	5120

$154.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 17mm Flare Nut Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 200NMIMH, 150MFIMHSS, 250NFIMHSS, 100T-I, 200T-I

Item #: 73777922
Brand: CDI
Model #: TCQYRXSM17A
Exact Tooling IR#: 04

Product Specifications
Head Type	Flare Nut
Size (mm)	17
For Use With	CDI Torque Wrenches 200NMIMH, 150MFIMHSS, 250NFIMHSS, 100T-I, 200T-I
PSC Code	5120

$154.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 13/16" Flare Nut Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 200NMIMH, 150MFIMHSS, 250NFIMHSS, 100T-I, 200T-I

Item #: 73777971
Brand: CDI
Model #: TCQYRXS26A
Exact Tooling IR#: 04

Product Specifications
Head Type	Flare Nut
Size (Inch)	13/16
For Use With	CDI Torque Wrenches 200NMIMH, 150MFIMHSS, 250NFIMHSS, 100T-I, 200T-I
PSC Code	5120

$154.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Wrench Type	Ignition
Tool Type	Standard
Size (Inch)	2
Finish/Coating	Black
Head Type	Double End
Overall Length (Inch)	19-1/4
Head Angle	15, 60
Head Thickness (Inch)	9/16
Warranty	Mfr's Lifetime Warranty
Material	Steel
Head Width (Inch)	3-15/16
PSC Code	5120