Square D - 5 Pole, NEMA Size 3, 90 Amp, 600 VAC, Thermal NEMA Overload Relay - For Use with Square D Class 8536 Starters

Item #: 56812662
Brand: Square D
Model #: 9065SDO14
Exact Tooling IR#: 04

Product Specifications
Starter Type	NEMA
NEMA Size	3
For Use With	Square D Class 8536 Starters
Voltage	600 VAC
Maximum Overload (A)	90
Sensing Method	Thermal
Number of Poles	5

$395.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 48 to 65 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 20, For Use with LC1D50A and LC1D65A

Item #: 55033963
Brand: Schneider Electric
Model #: LRD365L
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D50A; LC1D65A
Voltage	690 VAC
Maximum Overload (A)	65
Sensing Method	Thermal
Minimum Overload (A)	48
Trip Class	20
Overall Height (mm)	70
Overall Width (mm)	123
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; RoHS Compliant; UL 508

$148.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 250 VAC, IEC Overload Relay

Item #: 54523626
Brand: Schneider Electric
Model #: LT3SM00MW
Exact Tooling IR#: 04

Product Specifications

250 VAC, IEC Overload Relay -

Starter Type IEC

Voltage 250 VAC

Overall Height (mm) 100

Overall Width (mm) 100

Standards Met IEC 60034-11; VDE 0660

Additional Information Dectects Ground Fault

$397.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 1.8 to 2.6 Amp, 250 VDC, 690 Volt and 690 VAC, Thermal IEC Overload Relay - Trip Class 10A, For Use with LC1K, LC7K, LP1K and LP4K

Item #: 69526994
Brand: Schneider Electric
Model #: LR2K0308
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1K; LC7K; LP1K; LP4K
Voltage	250 VDC; 690 V; 690 VAC
Maximum Overload (A)	2.60
Sensing Method	Thermal
Minimum Overload (A)	1.80
Trip Class	10A
Overall Height (mm)	58
Overall Width (mm)	65
Standards Met	BS 4941; IEC 60947; NF C 63-650; VDE 0660

$92.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 9 Amp, 380 Coil VAC at 50/60 Hz, Nonreversible Enclosed IEC Motor Starter - Pushbutton Start (Green I), Pushbutton Stop/Reset (Red O)

Item #: 56805153
Brand: Schneider Electric
Model #: LE1D09Q7
Exact Tooling IR#: 04

Features and Benefits

IEC contators without thermal overload relays may have fixed thermal elements that require replacing the complete overload relay. This may occur when significant motor full load current changes are due to application requirements.

Non-reversing starters are designed with one phase line that connects to and runs voltage through the motor. The starter is used to turn a motor on and off.

Product Specifications
Starter Type	Contactor without Thermal Overload Relay
Amperage	9
Coil Voltage	380 VAC @ 50/60 Hz
Action	NonReversible
Motor Power	2.2 kW @ 220/230 VAC; 4 kW @ 380/400 VAC; 4 kW @ 415 VAC; 4 kW @ 440 VAC; 5.5 kW @ 500 VAC; 5.5 kW @ 660/690 VAC
Enclosure Type	Enclosed
Operator Type	Pushbutton Start (Green I); Pushbutton Stop/Reset (Red O)
Overall Height (mm)	166
Overall Width (mm)	88
Overall Depth (mm)	128
Standards Met	AC-3; IEC 60529; IEC 60947-4-1; RoHS Compliant

Product Specifications

Starter Type Contactor without Thermal Overload Relay

Amperage 9

Coil Voltage 380 VAC @ 50/60 Hz

Action NonReversible

Motor Power 2.2 kW @ 220/230 VAC; 4 kW @ 380/400 VAC; 4 kW @ 415 VAC; 4 kW @ 440 VAC; 5.5 kW @ 500 VAC; 5.5 kW @ 660/690 VAC

Enclosure Type Enclosed

Operator Type Pushbutton Start (Green I); Pushbutton Stop/Reset (Red O)

Overall Height (mm) 166

Overall Width (mm) 88

Overall Depth (mm) 128

Standards Met AC-3; IEC 60529; IEC 60947-4-1; RoHS Compliant

$238.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - Overload Relays Starter Type: IEC NEMA Size: 00-1

Item #: 55942163
Brand: Schneider Electric
Model #: LR9D01
Exact Tooling IR#: 04

Product Specifications

Overload Relays; Starter Type: IEC ; NEMA Size: 00-1 ; For Use With: LC1D09; LC1D12; LC1D18; LC1D25; LC1D32; LC1D38 ; Voltage: 690 V

Starter Type IEC

NEMA Size 00-1

For Use With LC1D09; LC1D12; LC1D18; LC1D25; LC1D32; LC1D38

Voltage 690 V

$126.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 30 to 38 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 10A, For Use with LC1D32 and LC1D38

Item #: 69648277
Brand: Schneider Electric
Model #: LRD35
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D32; LC1D38
Voltage	690 VAC
Maximum Overload (A)	38
Sensing Method	Thermal
Minimum Overload (A)	30
Trip Class	10A
Overall Height (mm)	70
Overall Width (mm)	70
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; RoHS Compliant; UL 508

$98.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 250 VAC, IEC Overload Relay

Item #: 69526549
Brand: Schneider Electric
Model #: LT3SA00MW
Exact Tooling IR#: 04

Product Specifications

250 VAC, IEC Overload Relay -

Starter Type IEC

Voltage 250 VAC

Overall Height (mm) 100

Overall Width (mm) 100

Standards Met IEC 60034-11; VDE 0660

Additional Information Dectects Ground Fault

$272.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Eaton Cutler-Hammer - Starter Heater - For Use with A200/B100 Starter Size 0, A200/B100 Starter Size 1, A200/B100 Starter Size 2

Item #: 02354835
Brand: Eaton Cutler-Hammer
Model #: FH42
Exact Tooling IR#: 04

Product Specifications
Starter Accessory Type	Heater
For Use With	A200/B100 Starter Size 0; A200/B100 Starter Size 1; A200/B100 Starter Size 2

$88.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 0.16 to 0.23 Amp, 250 VDC, 690 Volt and 690 VAC, Thermal IEC Overload Relay - Trip Class 10A, For Use with LC1K, LC7K, LP1K and LP4K

Item #: 56828858
Brand: Schneider Electric
Model #: LR2K0302
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1K; LC7K; LP1K; LP4K
Voltage	250 VDC; 690 V; 690 VAC
Maximum Overload (A)	0.23
Sensing Method	Thermal
Minimum Overload (A)	0.16
Trip Class	10A
Overall Height (mm)	58
Overall Width (mm)	65
Standards Met	BS 4941; IEC 60947; NF C 63-650; VDE 0660

$93.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 3 Pole, 18 Amp, 120 Coil VAC, 50/60 Hz, Nonreversible Enclosed IEC Motor Starter - 1 Phase Hp: 1 at 115 Volt, 3 at 230 V Volt, 3 Phase Hp: 10 at 460 Volt, 15 at 575 Volt, 5 at 200 Volt, 5 at 230 Volt

Item #: 56805047
Brand: Schneider Electric
Model #: LE1D183A72OG70
Exact Tooling IR#: 04

Features and Benefits

International Electrotechnical Commission (IEC) motor starters are contactors with overload relays and used for turning an electrical motor on/off, reversing motion and providing protection for overloads in electrical equipment. They are similar to National Electrical Manufacturers' Association (NEMA) motor starters, but are smaller in size and quicker to find detection of overload conditions.

Non-reversing starters are designed with one phase line that connects to and runs voltage through the motor. The starter is used to turn a motor on and off.

Product Specifications

Starter Type IEC

Amperage 18

Coil Voltage 120 VAC

Action NonReversible

Auxiliary Contact Configuration NC/NO

Horsepower at 3 Phase 10 @ 460 V; 15 @ 575 V; 5 @ 200 V; 5 @ 230 V

Horsepower at 1 Phase 1 @ 115 V; 3 @ 230 V

Enclosure Type Enclosed

Number of Poles 3

Frequency Rating (Hz) 50/60

Overall Height (mm) 255

Overall Height (Decimal Inch) 10.0400

Overall Width (mm) 172

Overall Width (Decimal Inch) 6.7700

Overall Depth (mm) 158

Overall Depth (Decimal Inch) 6-1/4

Standards Met CSA File No. LR23506 41 Class 3211 04; UL E154118 CCN NLDX CCN NLDX7

$410.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 95 to 120 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 10A, For Use with LC1D115 and LC1D150

Item #: 59032706
Brand: Schneider Electric
Model #: LRD4367
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D115; LC1D150
Voltage	690 VAC
Maximum Overload (A)	120
Sensing Method	Thermal
Minimum Overload (A)	95
Trip Class	10A
Overall Width (mm)	132
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; RoHS Compliant; UL 508

$472.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 3 Pole, 9 Amp, 240 Coil VAC, 50/60 Hz, Nonreversible Enclosed IEC Motor Starter - 1 Phase Hp: 1 at 230 Volt, 1/3 at 115 Volt, 3 Phase Hp: 2 at 200 Volt, 2 at 230 Volt, 5 at 460 Volt, 7.5 at 575 Volt

Item #: 56805211
Brand: Schneider Electric
Model #: E1D093A62OU7112
Exact Tooling IR#: 04

Features and Benefits

International Electrotechnical Commission (IEC) motor starters are contactors with overload relays and used for turning an electrical motor on/off, reversing motion and providing protection for overloads in electrical equipment. They are similar to National Electrical Manufacturers' Association (NEMA) motor starters, but are smaller in size and quicker to find detection of overload conditions.

Non-reversing starters are designed with one phase line that connects to and runs voltage through the motor. The starter is used to turn a motor on and off.

Product Specifications

Starter Type IEC

Amperage 9

Coil Voltage 240 VAC

Action NonReversible

Auxiliary Contact Configuration NC/NO

Horsepower at 3 Phase 2 @ 200 V; 2 @ 230 V; 5 @ 460 V; 7.5 @ 575 V

Horsepower at 1 Phase 1 @ 230 V; 1/3 @ 115 V

Enclosure Type Enclosed

Number of Poles 3

Maximum Overload (A) 8

Minimum Overload (A) 5-1/2

Frequency Rating (Hz) 50/60

Overall Height (mm) 255

Overall Height (Decimal Inch) 10.0400

Overall Width (mm) 172

Overall Width (Decimal Inch) 6.7700

Overall Depth (mm) 158

Overall Depth (Decimal Inch) 6-1/4

Standards Met CSA File No. LR23506 41 Class 3211 04; UL E154118 CCN NLDX CCN NLDX7

$369.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Eaton Cutler-Hammer - 3 Pole, 110 VAC at 50 Hz, 120 VAC at 60 Hz and 600 Volt, 9 Continuous Amp, 1 hp, Open NEMA Combination Starter - ABS Type Approved, cUL Listed, NEMA ICS 2-1993, UL Listed

Item #: 02353134
Brand: Eaton Cutler-Hammer
Model #: CN15AN3AB
Exact Tooling IR#: 04

Features and Benefits

National Electrical Manufacturers' Association (NEMA) starters are electrically controlled switches used to rapidly open (break) and close (make) a circuit. They are larger than the International Electrotechnical Commission (IEC) starters and are considred more rugged and durable.

Open housings are designed to disconnect the motor from the line at the time of starting or stopping of equipment. Ideal for inertial loads and they are finger safe.

Single or three-phase refers to either a single coil or three individual coils that connect to and run voltage through the connector. Single-phase lines are used for light-to-medium operations and three-phase lines are used for medium-to-heavy operations.

Non-reversing starters are designed with one phase line that connects to and runs voltage through the motor. The starter is used to turn a motor on and off.

Product Specifications
Continuous Amperage	9
Starter Type	NEMA
Enclosure Type	Open
Compatible Motor Phase	Single Phase, Three Phase
Action	NonReversible
Voltage	110 VAC @ 50 Hz; 120 VAC @ 60 Hz; 600 V
Number of Poles	3
Horsepower (HP)	1
Overall Height (mm)	98.60
Overall Height (Decimal Inch)	3.8800
Overall Width (Decimal Inch)	1-3/4
Overall Width (mm)	44-1/2
Overall Depth (mm)	88.60
Overall Depth (Decimal Inch)	3.4900
Standards Met	ABS Type Approved; cUL Listed; NEMA ICS 2-1993; UL Listed

Product Specifications

Continuous Amperage 9

Starter Type NEMA

Enclosure Type Open

Compatible Motor Phase Single Phase, Three Phase

Action NonReversible

Voltage 110 VAC @ 50 Hz; 120 VAC @ 60 Hz; 600 V

Number of Poles 3

Horsepower (HP) 1

Overall Height (mm) 98.60

Overall Height (Decimal Inch) 3.8800

Overall Width (Decimal Inch) 1-3/4

Overall Width (mm) 44-1/2

Overall Depth (mm) 88.60

Overall Depth (Decimal Inch) 3.4900

Standards Met ABS Type Approved; cUL Listed; NEMA ICS 2-1993; UL Listed

$585.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 18 Amp, 110 Coil VAC at 50/60 Hz, Nonreversible Enclosed IEC Motor Starter - Pushbutton Start (Green I), Pushbutton Stop/Reset (Red O)

Item #: 56829286
Brand: Schneider Electric
Model #: LE1D18F7
Exact Tooling IR#: 04

Features and Benefits

IEC contators without thermal overload relays may have fixed thermal elements that require replacing the complete overload relay. This may occur when significant motor full load current changes are due to application requirements.

Non-reversing starters are designed with one phase line that connects to and runs voltage through the motor. The starter is used to turn a motor on and off.

Product Specifications
Starter Type	Contactor without Thermal Overload Relay
Amperage	18
Coil Voltage	110 VAC @ 50/60 Hz
Action	NonReversible
Motor Power	10 kW @ 500 VAC; 10 kW @ 660/690 VAC; 4 kW @ 220/230 VAC; 7.5 kW @ 380/400 VAC; 9 kW @ 415 VAC; 9 kW @ 440 VAC
Enclosure Type	Enclosed
Operator Type	Pushbutton Start (Green I); Pushbutton Stop/Reset (Red O)
Overall Height (mm)	201
Overall Width (mm)	101
Overall Depth (mm)	153
Standards Met	AC-3; IEC 60529; IEC 60947-4-1; RoHS Compliant

Product Specifications

Starter Type Contactor without Thermal Overload Relay

Amperage 18

Coil Voltage 110 VAC @ 50/60 Hz

Action NonReversible

Motor Power 10 kW @ 500 VAC; 10 kW @ 660/690 VAC; 4 kW @ 220/230 VAC; 7.5 kW @ 380/400 VAC; 9 kW @ 415 VAC; 9 kW @ 440 VAC

Enclosure Type Enclosed

Operator Type Pushbutton Start (Green I); Pushbutton Stop/Reset (Red O)

Overall Height (mm) 201

Overall Width (mm) 101

Overall Depth (mm) 153

Standards Met AC-3; IEC 60529; IEC 60947-4-1; RoHS Compliant

$295.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 3 Pole, 25 Amp, 120 Coil VAC, Nonreversible Enclosed IEC Motor Starter - 1 Phase Hp: 2 at 120 VAC, 3 at 240 VAC, 3 Phase Hp: 15 at 460 VAC, 20 at 575 VAC, 7.5 at 208 VAC, 7.5 at 230 VAC

Item #: 49751852
Brand: Schneider Electric
Model #: LE1D253A62OG70
Exact Tooling IR#: 04

Features and Benefits

Enclosed full voltage starters connect the incoming power directly to the motor and are used in applications where the motor runs in only one direction and speed.

Non-reversing starters are designed with one phase line that connects to and runs voltage through the motor. The starter is used to turn a motor on and off.

Product Specifications
Starter Type	Enclosed Full Voltage Starter
Amperage	25
Coil Voltage	120 VAC
Action	NonReversible
Auxiliary Contact Configuration	NC/NO
Horsepower at 3 Phase	15 @ 460 VAC; 20 @ 575 VAC; 7.5 @ 208 VAC; 7.5 @ 230 VAC
Horsepower at 1 Phase	2 @ 120 VAC; 3 @ 240 VAC
Enclosure Type	Enclosed
Number of Poles	3
Standards Met	CSA; IEC; NEMA 1; UL

Product Specifications

Starter Type Enclosed Full Voltage Starter

Amperage 25

Coil Voltage 120 VAC

Action NonReversible

Auxiliary Contact Configuration NC/NO

Horsepower at 3 Phase 15 @ 460 VAC; 20 @ 575 VAC; 7.5 @ 208 VAC; 7.5 @ 230 VAC

Horsepower at 1 Phase 2 @ 120 VAC; 3 @ 240 VAC

Enclosure Type Enclosed

Number of Poles 3

Standards Met CSA; IEC; NEMA 1; UL

$287.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 132 to 220 Amp, 1,000 VAC, Thermal IEC Overload Relay - Trip Class 20, For Use with LC1F185 and LC1F400

Item #: 69527042
Brand: Schneider Electric
Model #: LR9F5571
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1F185; LC1F400
Voltage	1000 VAC
Maximum Overload (A)	220
Sensing Method	Thermal
Minimum Overload (A)	132
Trip Class	20
Overall Height (mm)	101
Overall Width (mm)	123-1/2
Standards Met	EN/IEC 60947-4-1; IEC 60255-17; IEC 60255-8; VDE 0660

$407.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 30 to 40 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 10A, For Use with LC1D40A and LC1D65A

Item #: 69527414
Brand: Schneider Electric
Model #: LRD340
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D40A; LC1D65A
Voltage	690 VAC
Maximum Overload (A)	40
Sensing Method	Thermal
Minimum Overload (A)	30
Trip Class	10A
Overall Height (mm)	70
Overall Width (mm)	123
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; RoHS Compliant; UL 508

$148.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Square D - 2 Poles, 30 Amp, NEMA, Enclosed Toggle Manual Motor Starter - 1 hp at 90 VDC, 1-1/2 hp at 230 VDC, 2 hp at 115 VAC, 2 hp at 115 VDC, 2 hp at 230 VAC, 3 hp at 460 VAC & 3 hp at 575 VAC, CE, CSA, NEMA 4 & UL Listed

Item #: 54529540
Brand: Square D
Model #: 2510KW1A
Exact Tooling IR#: 04

Features and Benefits

National Electrical Manufacturers' Association (NEMA) starters are electrically controlled switches used to rapidly open (break) and close (make) a circuit. They are larger than the International Electrotechnical Commission (IEC) starters and are considred more rugged and durable.

Toggle switches are designed for safety and speed of an operation. They closes or open contacts with a lever.

Enclosed housings are designed to ensure that the motor is never disconnected from power during starting. Ideal for frictional loads and prevention of electrical shocks and dust.

Product Specifications

Starter Type NEMA

Amperage 30

Operator Type Toggle

Enclosure Type Enclosed

Horsepower (HP) 1 @ 90 VDC; 1-1/2 @ 230 VDC; 2 @ 115 VAC; 2 @ 115 VDC; 2 @ 230 VAC; 3 @ 460 VAC; 3 @ 575 VAC

Number of Poles 2

Standards Met CE; CSA; NEMA 4; UL Listed

$482.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 9 Amp, 600 Coil VAC, Nonreversible Enclosed IEC Motor Starter - 1 Phase Hp: 0.3 at 120 VAC, 1 at 240 VAC, 3 Phase Hp: 2 at 208 VAC, 2 at 230 VAC, 5 at 460 VAC, 7.5 at 575 VAC

Item #: 49752058
Brand: Schneider Electric
Model #: LE1D093A62OX70
Exact Tooling IR#: 04

Features and Benefits

Enclosed full voltage starters connect the incoming power directly to the motor and are used in applications where the motor runs in only one direction and speed.

Non-reversing starters are designed with one phase line that connects to and runs voltage through the motor. The starter is used to turn a motor on and off.

Product Specifications
Starter Type	Enclosed Full Voltage Starter
Amperage	9
Coil Voltage	600 VAC
Action	NonReversible
Auxiliary Contact Configuration	NC/NO
Horsepower at 3 Phase	2 @ 208 VAC; 2 @ 230 VAC; 5 @ 460 VAC; 7.5 @ 575 VAC
Horsepower at 1 Phase	0.3 @ 120 VAC; 1 @ 240 VAC
Enclosure Type	Enclosed
Standards Met	CSA; IEC; NEMA 1; UL

Product Specifications

Starter Type Enclosed Full Voltage Starter

Amperage 9

Coil Voltage 600 VAC

Action NonReversible

Auxiliary Contact Configuration NC/NO

Horsepower at 3 Phase 2 @ 208 VAC; 2 @ 230 VAC; 5 @ 460 VAC; 7.5 @ 575 VAC

Horsepower at 1 Phase 0.3 @ 120 VAC; 1 @ 240 VAC

Enclosure Type Enclosed

Standards Met CSA; IEC; NEMA 1; UL

$204.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Starter Type	IEC
Voltage	250 VAC
Overall Height (mm)	100
Overall Width (mm)	100
Standards Met	IEC 60034-11; VDE 0660
Additional Information	Dectects Ground Fault

Starter Type	IEC
NEMA Size	00-1
For Use With	LC1D09; LC1D12; LC1D18; LC1D25; LC1D32; LC1D38
Voltage	690 V